Analisis Penerapan K3 dalam Pelaksanaan Bongkar Cargo Special Handling di PT. Terminal Petikmas Surabaya

Ristin Alfariza Putri; Trisnowati Rahayu; Anak Agung Istri Sri Wahyuni; Muhammad Dahri

doi:10.31004/innovative.v5i3.19299

Authors

Ristin Alfariza Putri Politeknik Pelayaran Surabaya
Trisnowati Rahayu Politeknik Pelayaran Surabaya
Anak Agung Istri Sri Wahyuni Politeknik Pelayaran Surabaya
Muhammad Dahri Politeknik Pelayaran Surabaya

DOI:

https://doi.org/10.31004/innovative.v5i3.19299

Abstract

It is important to review the use of auxiliary equipment in unloading special handling containers and the implementation of K3, so that unwanted incidents do not occur in loading and unloading activities at the Surabaya Container Terminal. The purpose of this study is to find out the application of K3 in Cargo special handing unloading activities in accordance with regulations, to find out the potential risk of accidents that occur during Cargo special handling unloading activities at PT. Surabaya Container Terminal. The method used is qualitative descriptive in the form of words or pictures so that it is easy to understand by others. The data sources and data collection techniques in this study are primary data from interviews, observations and secondary data sources obtained from journals, interns, and previous research. The data analysis techniques used used used data collection, data reduction, data presentation, and conclusion drawn. The results of this study are the application of K3 and the potential risk of work accidents during Cargo Special Handling Unloading activities at PT Terminal Petikemas Surabaya. The application of K3 in Cargo Special handling unloading activities is in accordance with existing regulations because it has used the auxiliary equipment that has been provided, but there are still some accidents that occur caused by human and environmental factors.

References

2018, P. R. N. 7 T. (2018). PM Perhubungan Republik Indonesia NOMER PM 50 TAHUN 2021. Peraturan Menteri Kesehatan Republik Indonesia Nomor 4 Tahun 2018, 151(2), 10–17.(diakses pada 11 November 2024)

Elektronik, B. S. (2023). Peraturan Mentri Ketenagakerjaan Republik Indonesia NOMER 11 TAHUN 2013. 1–20. .(diakses pada 11 November 2024)

Gaus, K. S. (2023). Analisis Program Kesehatan Dan Bongkar Muat Di Pt Berlian Jasa Terminal Indonesia. .(diakses pada 16 November 2024)

Hermanto, A. W. (2008). Analisa Tingkat Kepuasan Konsumen Terhadap Pelayanan Terminal Peti Kemas Semarang. Program Pascasarjana, Thesis, 1–117. .(diakses pada 17 November 2024)

Pagesti, N. F. (2022). Penanganan Penurunan Pendapatan Badan Usaha Pelabuhan Batam Akibat Pandemi Dampak Covid-19. Skripsi, 10–11. (diakses pada 19 November 2024)

Ridwan, Luhur, A., & Elnath G, M. (2023). Pengaruh Performa Quay Container Crane dan Penerapan System Single Cycle dan Dual Cycle Terhadap Bongkar Muat Peti Kemas di KSO Peti Kemas Koja Jakarta. Jurnal Maritim Polimarin, 9(1), 45–57. https://doi.org/10.52492/jmp.v9i1.102.(diakses pada 19 November 2024)

Septian Abdya Raysi, D., Dwi Priyohadi, N., & Hanna Ester Kalangi STIA dan Manajemen Kepelabuhan Barunawati Surabaya Jl Perak Barat No, M. (n.d.). OPTIMALISASI PENERAPAN E-RTG PADA RTG KONVENSIONAL DI TERMINAL PETIKEMAS NILAM. In Jurnal Administrasi Bisnis (JUTRANIS).(diakses pada 01 Desember 2024)

Suryantoro, B., Punama, D. W., & Haqi, M. (2020). Jurnal Baruna Horizon. Jurnal Baruna Horizon Vol. 3, No. 1, 3. (diakses pada 01 Desember 2024)

Swastawan, S. (2018). Analisis Potensi Bahaya Dan Perbaikan Sistem Keselamatan Dan Kesehatan Kerja Dengan Metode HIRARC. Skripsi, 4–5. (diakses pada 01 Desember 2024)