Analisis Kuat Tekan Beton Dengan Penambahan Zat Aditif
DOI:
https://doi.org/10.31004/innovative.v5i2.18373Keywords:
Addition H.E, Bestmittel, Tricosal BVS, additivesAbstract
The purpose of this study was to determine the effect of Addition H.E, Bestmittel, and Tricosal BVS on the compressive strength of characteristic concrete using experimental research methods / quantitative comparisons. Based on the test results on the addition of the three types of additives, it can be concluded that the compressive strength value of concrete obtained from the addition of the Addition H.E additive with a variation of the addition of 0.2% obtained a characteristic concrete compressive strength value of 340.00 kg/cm², and with a variation of the addition of 0.6% 100.09 kg/ cm². The addition of the Besmittel additive with a variation of 0.2% addition obtained a characteristic concrete compressive strength value of 359.60 kg/cm², and with a variation of the addition of 0.6% 31.38 kg/cm², while the addition of the additive Tricosal BVS with a variation of the addition of 0.2% obtained a compressive strength value of concrete characteristics of 322.22 kg/cm², and with a variation of the addition of 0.6% 343.13 kg/cm², while the BVS Tri-cosal additive showed an increase in concrete compressive strength at the addition of 0.6%.
References
Badan Standar Nasional. (2000). SNI 03-2834-2000: Tata cara pembuatan rencana campuran beton normal.
Enda D, Pribadi JA, F. O. (2021). pengaruh pengurangan persentase volume agregat kasar dalam campuran beton terhadap kuat tekan beton normal dengan penambahan zat aditif. Seminar Nasional Industri Dan Teknologi, 2021: SNIT 2021, 56–57. https://eprosiding.snit-polbeng.org/index.php/snit/article/view/212
Fitrianto AJ, Hakam DF, Prahastono I, N. A. (2021). Pengaruh Penambahan Zat Aditif Pada Pengecoran Beton Joint Pit SKTT 150 kV Sario – Teling. Rotasi, 23(1), 39–49. https://doi.org/https://doi.org/10.14710/rotasi.23.1.39-49
Isnaini F, Nisumanti S, F. M. (2023). Analisis Beton K-400 Menggunakan Zat Aditif Superplasticizer Dengan Silicafume Terhadap Setting Time. PROSIDING SEIMA : Seminar Ilmiah Mahasiswa, 1(1), 39–45. https://ejournal.uigm.ac.id/index.php/seima/article/view/3006
Komajaya E, Agustine D, Abdillah H, A. L. (2020). Kuat tekan beton dengan menggunakan limbah pecahan keramik sebagai bahan aggregat kasar ditambah dengan zat aditif. Jimtek, 1(1), 5–10. https://doi.org/https://doi.org/10.33592/jimtek.v1i1
Nugraha Y, Prayuda H, S. F. (2017). Pengaruh Variasi Bahan Tambah Abu Sekam Padi dan Zat Adiktif Bestmittel 0,5% terhadap kuat tekan beton mutu tinggi. Semesta Teknika, 20(2), 116–124. https://doi.org/https://doi.org/10.18196/st.v20i2.3172
Rachman DN, M. (2020). Analisa Penambahan Zat Adiktif Superplacitizer Dan Serat Steel Fiber Terhadap Mutu Beton K. 300 Dalam 7 Hari. TEKNIKA: Jurnal Teknik, 7(2), 142–154. https://doi.org/10.35449/teknika.v7i2.136
Ridwan A, Winarko S, S. E. (2018). Jobmix Beton Mengunakan Pasir Lumajang Dan Penambahan Additive Masterpozzolith®402R. Jurnal CIVILA, 3(2), 192–197. https://doi.org/10.30736/cvl.v3i2.263
Saputra, G. (2021). Perbedaan Uji Kuat Tekan Beton Menggunakan Zat Aditif dan Non Aditif. Jurnal Statika, 7(1), 1–9. https://ejournal.polraf.ac.id/index.php/JTS/article/view/61/64
Tabaiyan MFY, P. G. (2023). pengaruh penambahan zat aditifgrolen HP10+ dan additon HE water reducing retarding admixture superplasticizer terhadap kuat tekan beton. Prosiding Seminar Nasional Teknik Sipil 2023, 31–36. https://proceedings.ums.ac.id/sipil/article/view/2688
Wardi S, Sridewi AK, A. A. (2021). Pengaruh Penambahan Zat Aditif Fosroc Conplast R dan Fosroc SP 337 Terhadap Kuat Tekan Beton Dengan Variasi Kadar Air. Media Ilmiah Teknik Sipil, 10(1), 10–16. https://doi.org/10.33084/mits.v10i1.2304
Zamroni, Susanti E, F. D. (2020). Pengaruh penggunaan zat aditif tipe C pada kekuatan tekan beton. Jurnal Teknik Sipil, 1(2), 132–138. https://doi.org/https://doi.org/10.31284/j.jts.2020.v1i2.1419
Zuraidah S, Khaidir M, A. W. (2018). Penambahan Bahan Aditif Polymer Polierta Untuk Meningkatkan Kuat Tekan Beton. Jurnal Rekayasa, 3(1), 23–30. https://doi.org/http://dx.doi.org/10.53712/rjrs.v3i1.418
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Rahman A. Djau, Nasir Bumulo, Ratna Dwi Ma’sum, Anjani Eka Putri Ismail
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
